Filter monitoring is really a core task of differential pressure gauges ? the differential pressure increases when the filter becomes clogged. The measuring instruments thus signal when the filter must be cleaned or replaced. The efficiency of such a solution could be illustrated by the exemplory case of WIKA pressure gauges of the DELTA-line series in water treatment.
With microswitch and operating display ? the WIKA model DPGS40 differential pressure gauge enables safe filter monitoring.
In the water industry, reverse osmosis is really a widely used process to separate water from unwanted substances. The corresponding filtration systems use semi-permeable membranes.
For Official monitoring, an international solution provider for the treatment of drinking, industrial and wastewater uses WIKA model DPGS40 differential pressure gauges in its plants in Germany. The instrument measures the pressure on both sides of the membrane.
Simplistic at the filter
As well as the on-site display of the differential pressure, the pressure gauge comes with an integrated microswitch. This sends a warning signal to the control centre whenever a defined limit value is reached. This permits the operator to arrange for timely cleaning or replacement of the filter. Due to its mechanical measuring principle, the filter monitoring also functions reliably in the event of a power failure.
Continuous monitoring
Prompt intervention at the filter is essential for just two reasons. Firstly: It prevents possible contamination of the water. Secondly: The operator saves energy by making use of continuous filter monitoring. The more fouled a filter is, the harder the pump has to work for the desired media flow.
Integrated working pressure indication
The customer chose the DELTA-line pressure gauge for filter monitoring for yet another reason ? due to integrated working pressure indication. These details is important to the plant manager because it allows him to draw conclusions concerning the respective pump performance. To obtain this information minus the two-in-one solution, he would otherwise have had to create an additional measuring location.
Further measuring requirements
As well as filter monitoring, the differential pressure gauges of the DELTA-line series are suitable for tasks in level and flow measurement. In different versions, they cover a wide range of applications. DPGx instruments are available with analogue signal output or more to two microswitches. All have ATEX approval. Gleam variant with SIL certification and DNV-GL approval for marine applications.
Note
An overview of all instruments in the DELTA-line series can be found in our flyer. Further technical home elevators the products are available in the pressure gauge and contact pressure gauge products on the WIKA website. When you have any questions, your contact will gladly assist you to.
Also read our article
Filter monitoring: A crucial component for energy-efficient operation