How TÜV SÜD are helping to address technical challenges
As a half of the worldwide drive to scale back greenhouse gas emissions there’s a pressing need to move towards clear fuels for energy. The use of hydrogen as a substitute for pure gasoline within the gas grid networks is seen as a serious contributor to assembly this objective. Manufacturers, gasoline network companies and governments are working closely collectively to deal with numerous technical challenges before this change can become a actuality. TÜV SÜD National Engineering Laboratory is a world-leading centre for circulate metrology analysis and development. To assist address those challenges, it’s constructing a variety of hydrogen exams facilities. These services embody the Hydrogen Domestic Gas Metering Test Facility, developed for testing smaller scale gear at decrease pressures, coupled with the development of a gas primary move standard test facility, which supplies lower measurement uncertainty and larger options for basic metrology analysis, as nicely as larger hydrogen move rate and strain ranges. This article describes the present hydrogen test facilities and people underneath development at TÜV SÜD National Engineering Laboratory.
The hydrogen home gasoline metering check facility has been developed to supply a platform to analyze not only the efficiency of circulate meters, but in addition for other equipment associated to hydrogen operation, together with management valves, PRVs, regulators, warmth exchangers, and so on. in a hydrogen service. The check facility has been developed for small scale functions and may deliver a variety of fuel flows including hydrogen, methane, nitrogen or mixtures of hydrogen and methane. The test facility is capable of delivering up to 38 Sm3/h of hydrogen to the system underneath test at line pressures up to 1500 mbar, with temperatures ranging from -25 to fifty five ˚C. It can function with line sizes starting from 5 to 20 mm. Construction was accomplished final 12 months and it’s now out there for use by trade for product improvement or circulate testing of hydrogen equipment and valves.
The switch over from pure gas to hydrogen could take place in a staged strategy involving hydrogen/natural gas blends or direct swap to pure hydrogen. Manufacturers can carry out a whole assessment of equipment efficiency throughout a spread of hydrogen to pure gas compositions from 0 to 100 percent hydrogen.
The hydrogen home gas metering test facility has been particularly designed for low-pressure hydrogen purposes and TÜV SÜD recognised that there was additionally a necessity for a bigger move, larger stress test facility. TÜV SÜD has undertaken เครื่องมือที่ใช้วัดความดันโลหิต underneath the BEIS-funded Flow Programme to establish a Gas Primary Flow Standard Test Facility. Initially, it’ll function with hydrogen, nitrogen and methane however with a view to be prolonged to carbon dioxide. The facility is currently in the detailed design stage and the plan is to have an operating envelope of up to one hundred Sm3/hr of gasoline with the power to function up to 120 bar.
For extra info on how TÜV SÜD National Engineering Laboratory can help with your valve move testing needs, contact Marc MacDonald on marc.macdonald@tuvsud.com
Share